100k prize draw day 5 - the last winner

The Result

The lucky winner of a set of Too Fat Lardies rules up to the value of £25... (and may I say? If you didn't win, go check out http://www.toofatlardies.co.uk/ and try a copy of IABSM or Sharp Practice or Dux Britanniarum anyway!)

...is rogerbw!!!!

Roger, please drop me an email to fleetfootmike@gmail.com and let me know which ruleset you'll be after.

100k Prize Draw day 4 - the winners

The Results!

First out of the hat....

...David Larkins, who wins the Brettonians, as per his choice...

And second...

...AHunt, who, since he didn't express a preference, gets, by a process of elimination, Commissar Yarrick and the metal 'Stealers.

Congrats, guys! Snailmail addresses to fleetfootmike@gmail.com, please :D

100k Prize draw day 3 - the winners

Managed to clear most of the floor in the workshop off onto either shelving or the other room (which is looking even more of a tip, but half of the stuff in isn't ours. we just have a Big Storage Room...)

Got the terrain tiles and the big hill painted - this is cheap 'Warm Tan' emulsion from our local discount shop.

But, more important.

The Results!

Winning a box of Conquest Games Normans and a copy of "When Christ And His Saints Slept"...

Sean!

Please drop me an email at fleetfootmike@gmail.com with contact details and tell me if you want the infantry or cavalry box.

Note: tomorrow's draw may be slightly late, as I'll be on a train at 8am. Friday's may be slightly late depending on how hungover I am :D

100K Prize Draw day 2 - the winners

Didn't get as much done as I'd like on the various terrain projects yesterday - going to be constrained by three lots of drying times, I suspect.

Did, though, get to hit B&Q and stock up on supplies.

But, more important:

The Results

Just one item for day 2's draw, the large stack of GW LotR sprues. And the winner is....

drumroll

Chris Stoesen!!

Usual rules - email to fleetfootmike@gmail.com, please, with contact details!

100K Prize Draw day 1 - the winners

Back from a trip to Bomber County (that's Lincolnshire) for the weekend. Didn't do East Kirkby, but did get buzzed by their Dakota at about 1000 feet while on the roof of Tattershall Castle, which was pretty awesome. The window displays also reminded me of stuff I need to do in the next heraldry post!

Got back and managed to do a bit more work on scenery - specifically, started on some terrain tiles. Ran out of foam glue, so that's it for now :D

And now (drumroll):

The Results:

The Airfix 54mms go to M R Lee.
The 20mms go to Monty

Congratulations to you both - if you could wing an email to fleetfootmike@gmail.com with your address, I'll add your prizes to the end-of-the-week posting pile!

Terrain part 7 - more on the big hill

As you may recall, we left the big hill as a skeletal structure in blue craft foam and foam board. Having managed to clear myself a space to work in, it was time (having run out of space in both the rubbish and recycling bins) to stop clearing up and continue on with the hill.

Here's the step by step:

First up, start with scrunched up balls of newspaper between the ribs, to give the hill a bit of support. These are loosely held in place with masking tape.

The stack of hard drives is to weigh down the slightly warped bit of foamboard while the glue on another rib sets to pull out the warp.

And here we are finished - a hill carcass ready for an outer skin.

The outer skin is Woodland Scenics plaster bandage, courtesy of the local excellent model railway shop, Trains4U (they do mail order). It is dusty as all heck, so what I do is open the package containing the roll and put it in a plastic bag. I then work with my hands inside the bag, ripping off strips one at a time around 3" wide (that's the bit that makes all the dust!), and dunking them in an ice-cream tub of water.

Get each strip good and wet, and lay them, overlapping, across the carcass of ribs, craft foam, masking tape and screwed up newspaper.

 Leave to dry for a day or two. I'm in Cleethorpes. They're drying and have been since Thursday.

Tidying the workshop

Tim the builder finally made it this past week: result? I now have

• a bunch of 600mm square bits of hardboard, which means that the terrain projects can move on
• more importantly, the small room off my workshop now has damp-proof. insulated walls, a proper laminate floor and.... several feet of SHELVES!!!

Which means I now have managed to clear a 2'x3' flat area on one of my two work tables, which means work on several projects can continue.